| Universal
& Circular Combo FTA
Satellite LNB
|
| Dual LNBF-DGL-1189S
The following LNBFs are used for
FTA reception only. |
|
DGL-1189S
Products Specification
|
F/D
Ratio |
0.6
|
Input Freq. Range |
11.70~12.75GHz (10.60/10.75GHz:
22K) |
Gain
Flatness |
4dB over Band
|
Conversion Gain |
45dB @ 25℃
|
L.O.
Freq. |
10.60/9.75GHz
|
L.O. Stability |
±1.0MHz @ 25℃
±3.0MHz @ -40℃~60℃
|
Cross
polarization Discrimination |
60dB(min)
|
L.O. Phase Noise |
-50dBc/1KHz
-75dBc/10KHz
-95dBc/100KHz |
Noise
Figure |
0.5dB (Typ.)
|
Output Freq.
Range |
950~1950MHz
(9.75GHz)
950~2150MHz (10.60GHz) |
Band
Switching Voltage |
0/22KHz Tone
|
Output Connector |
75Ω F-TYPE Female
|
| Operating
Temperature |
-40℃~60℃ |
Polarization
selection |
V: 12V~14V DC H: 16~18V
DC |
|
SETUP INSTRUCTIONS
Using a 30-inch or larger dish, aim with the following
settings:
For DGL-1189S
you should setup as below:
Satellite Name: 118°W (Anik F3) or 119°W (Echo7)
- LNB Power: ON
- LNB Type: Universal
- LNB Frequency: 9750Mhz/10750 MHz
Finally, do an AUTO SCAN or a BLIND SCAN
For DGL-1189D
and DGL-1189Q
you should setup as:
Satellite Name: 118°W (Anik F3) or 119°W (Echo7)
- LNB Power: ON
- LNB Type: Universal
- LNB Frequency: 9750Mhz/10600 MHz
Finally, do an AUTO SCAN or a BLIND SCAN
|
|
|
|
| |
|
|
